How to use your Balanzza Luggage Scales
Calibrating your Balanzza
Calibration may be required when it is initially installed, if the mini scale is moved to a substantial distance.
This is necessary because the weight of a mass in one location is not necessarily the same in another location. Also, with time and use, mechanical deviations may occur.
How to calibrate
Before entering calibration mode, press to turn the power on for 1 minute.
Enter calibration mode
Press to turn the power off. Press [Reset] first, then Press, while keeping pressing [Reset]; the display will show the A/D value.
Calibration by the weight
Wait for the stable value to be displayed, Press the display will show "0", after 2 seconds, the display will show calibration weight value.
Place the calibration weight on platform. After the stable value is displayed, then press, the display will show "CAL", after 2 seconds, the displayed will return to "PASS" and then return to A/D value, now calibration is finished.
Press, turn off the power, press turn on the power again, place the weight on the platform to make sure whether weighing is correct, if not, repeat steps 2-5.
Return to weighing mode
Press to turn the power off. Press again to turn on the power and the scale return to the weighing mode.
Weighing
Before weighing:
Whenever possible, please allow the scale to warm up for 30 seconds after first turning the power on so that the scale will function properly and accurately.
Error messages:
EEEE: Overload
: Low battery
Weighing procedures:
Press the button to turn on the scale; and hold it for 3 seconds to turn off the scale.
When power is turned on, all display segments appear on LCD for a few seconds and finally “0” will appear on the display.
Select the weighing unit with [UNIT].


|